The Hydrapower 73AS1800, AS732000 and AS732200 Hydraulic
Angle Sweepers couple directly to the quick attach on your loader*.
The sweeper is supplied with storage legs for parking and the jockey
wheel adjusts brush contact. The loader side of the sweeper is fitted
with a rubber skirt to protect the operator from debris when sweeping.
Three sweeping widths are available: 1800 mm (73AS1800), 2000 mm
(73AS2000) and 2200 mm (73AS2200). The main brush comprises of
large 500mm (24”) diameter poly and wire brush segments, although
the ratio of poly/wire segments can be altered to suit your application.
The entire brush mechanism is suspended on a frame by a heavy-duty
ball-race turntable and can be pivoted up to 300 left or right of centre.
The broom is driven directly off a large displacement hydraulic motor,
eliminating chain and sprocket wear parts.

For optimum sweeping the angle sweeper is driven forward with brush
angled to form debris into a windrow. Optional fittings include dual
jockey wheels, hydraulic angling and a motor guard.

(*Thus unit can also be driven off a tractor’s remotes and is fitted
with a three-point linkage frame. The unit shown does not have any
jockey wheels fitted and has hydraulic angling.)

MAXIMUM PRESSURE:       207 Bar (3000 PSI)
OPERATING FLOW RATE:   35 - 95 LPM (10 - 25 GPM)
MASS (1800 mm sweep):  320 kg